Date:
N,N,N',N'-tetramethyl-2,2'-oxybis(ethylamine)
70% 2'-oxybis[N,N-dimethyl-Ethanamine...
N-methylmorpholine
Tetramethyl, propylene diamine
N-formylmorpholine
Olefin extraction solvent
2,6,10-Trimethyl-2,6,10-triazaundecane
Epoxy curing agent-amine ether YT60
9-(3'-three-bromophenyl) carbazole
9-(2'-bromophenyl) carbazole
Pentamethyldiethylenetriamine
CAS No.: 3030-47-5
Product Specification:

Item

Indicators

Proportion

0.8335±0.0005

Refractive index(n20D)

1.4435±0.0005

Boiling point

201℃

Flash point

75℃(167°F)

Water solubility

Not completely dissolved

Appearance

Colorless to pale yellow transparent liquid

Product introduction: The catalyst is a highly reactive tertiary amine catalyst, its chemical composition is pure pentamethyldiethylenetriamine(PMDETA).
Application: The catalyst is generally used in rigid foam can improve the effect of strong foam bubble mobility, it is often as a total catalyst, dimethyl cyclohexane, dimethyl ethanolamine share. Less fluorine rigid formula, due to the increase in moisture, accelerate the foam reaction.
Safety and Handling Precautions: According to the classification system of the U.S. Transport Department, the catalyst will be classified as alkaline corrosive liquid; if contact with skin, eyes, lungs and mucus membrane, the product is now significant toxicity and can cause severe irritation. Be careful to avoid such products contagious skin and eyes, and to avoid breathing vapors. In dealing with such products, to wear chemical protective masks, ethyl rubber gloves, rubber boots and aprons. For exposure in the aerosol of this product are required to wear breathing apparatus to protect. Once a contagious skin or eyes, the need to immediately wash the affected area with plenty of water for at least 15 minutes and seek medical advice immediately.
Packing: 25kg,l70kg metal pail or plastic drum.
Home | About Us | Products | Order | Contact | 中文版
Copyright(C)2012, Liyang Yutian Chemical Co.,Ltd. All Rights Reserved.Supported by ChemNet ChinaChemNet Toocle